Kawasaki Bikes

Share this site:   

• Tweet

Suzuki Motors is a Japanese multinational corporation company producing a range of automobiles with a variety of small combustion-powered car engines. These first Suzuki motor vehicles were powered by a then-innovative, liquid-cooled, four-stroke, four-cylinder engine. These new and used and reconditioned engines are available at global engines and gearboxes.

This engine is a type of internal combustion engine. The internal combustion engine is an engine in which the combustion, or rapid oxidation, of gas and air occurs in a confined space called a combustion chamber. This exothermic reaction of a fuel with an oxidizer creates gases of high temperature and pressure, which are permitted to expand. The defining feature of an internal combustion engine is that useful work is performed by the expanding hot gases acting directly to cause pressure, further causing movement of the piston inside the cylinder. For example by acting on pistons, rotors, or even by pressing on and moving the entire engine itself.

This contrasts with external combustion engines, such as steam engines and Stirling engines, which use an external combustion chamber to heat a separate working fluid, which then in turn does work, for example by moving a piston.
The term Internal Combustion Engine (ICE) is almost always used to refer specifically to reciprocating engines, Wankel engines and similar designs in which combustion is intermittent. However, continuous combustion engines, such as jet engines, most rockets and many gas turbines are also internal combustion engines.
The G10 is an inline 3 cylinder engine utilizing aluminum alloy for the block, cylinder head and pistons. The G10 has 1.0 liter of displacement and is equipped with either a carburetor or electronic fuel injection and has an optional turbocharger. It has a single overhead camshaft driving six valves.
The G13 is an in line 4 cylinder engine utilizing aluminum alloy for the block, cylinder head and pistons. Displacing 1.3 L (1298 cc/79 in), fuel delivery is either through a carburetor, a single point fuel injection or a multi-point fuel injection. The engine was produced as either an 8 valve with a single overhead camshaft (G13A) or as a 16 valve with double overhead camshafts (G13B).